HVR Pentagon Open Wire Wound Resistors are close wound with oxidised resistance wire and each resistor is fitted with an adjustable tapping clip as standard.

 

The Nickel Silver end bands and tapping clips are suitable for soldered connections, screw terminals or on some size 'Faston' connectors.

 

Extra tappings can be provided on request.

 

HVR Pentagon Open Wire Wound Resistors fall info the following categories:

 
       

Unmounted Open Wire Wound Resistors.

 
 
 
 

       

This arrangement is suitable for mounting resistors direct on to a panel of 6mm or less in thickness and consists of cupped washers in each end of the resistor with a tie-rod protruding.

 
 
 
 

       

Horizontally mounted Open Wire Wound Resistors.

 
 
 
 

 

     

Horizontally mounted Open Wire Wound Resistors with reverse feet.

 
 
 
 

       

Vertically mounted Open Wire Wound Resistors.

 
 
 
 

       

Mainly used for Dynamic Braking or where a pulse rated resistor is required.

 
 
 
 

 
 
 
                 

Copyright © HVR Pentagon Ltd 2014. All Rights Reserved. This page last updated: 6 March, 2014.